Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.

Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.

Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.

IRWIN DUAL AUGER WOOD BIT 11/16

Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.

IRWIN DUAL AUGER WOOD BIT 13/16

Forged from a single piece of high-grade tool steel. Tempered, ground and polished from toe to heel. Hardwood handle with a polished steel ferrule is securely attached.

IRWIN DUAL AUGER WOOD BIT 1"

Lightweight hard hat offer great balance on the head, allowing comfortable, all-day wearing. The unique 1-touch suspension ensures that the hard hat can stay in place, even when bending over. Used in applications such as construction work, tree trimming or road work. Safety works hard hats meet all applicable requirements of the ANSI Z89.1-2009.

Bit will fit all hammer drills with 3 jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.

Black oxide coating for corrosion resistance and 135 deg split point which minimizes bit walk. Includes one 5/64 in, 7/64 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in and 3/8 in, two 1/16 in, 3/32 in, 1/8 in and rubber-sided case with sliding latch for added security.

Blades of quality steel hot drop-forged for sharp edge, long life, rust resistant and individually hand edged. Cuts straight and wide curves (when trimming light gauge stock). Flat face guides tool along straight line. Cuts low carbon cold-rolled steel. Cushion grip for comfort.

Turn screw to adjust pressure and fit work, convenient wire cutter, stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Long, straight nose provides easy access in narrow, hard-to-reach places.

Drop forged jaws with center cut blades, heat-treated for wear resistance and long cutting life. Cuts soft and medium/hard materials (maximum hardness of material to be cut Brinell 300/Rockwell C31). Toggle joints turn 50 lb hand pressure to 4000 lb of cutting pressure. One-piece, aluminum alloy handles with rubber grips. Do not use any cutter on energized circuits, wire or cable.

The drilling hammer has a bonded and molded Shock Reduction Grip which offers the utmost in both comfort and durability, while reducing vibrations caused by impact. The head and handle are forged in one-piece and have an attractive blue UV coating, both faces are fully polished. For use with chisels, punches, star drills and hardened nails. Permits heavy blows with limited swing.